top of page
Jon Hilty
Search
Jonathan Hilty
Apr 17, 20201 min read
Small update - Magazine & "How To" Guide
Hey everyone, This is just a teeny tiny update on a few relevant things. First off, one of my authcromes was recently featured on the...
798 views
0 comments


Jonathan Hilty
Oct 30, 201910 min read
Let's talk about the Second Varnish
(Note: I originally wrote most if this in June 2019, but waited forever to post it while I continued experimenting with coatings...)...
820 views
0 comments


Jonathan Hilty
Sep 18, 201812 min read
A long overdue autochrome update
I've been stringing people along, telling them that I plan on adding a new autochrome blog post when I "figure things out a bit". Well,...
1,830 views
0 comments


Jonathan Hilty
Dec 19, 20173 min read
Initial successes with reversal processing
This blog entry is going to be short and sweet -- As it turns out, I was very close to full success with reversal processing. After...
490 views
0 comments


Jonathan Hilty
Dec 4, 20174 min read
Reversal processing woes
Although I won't make the case that they're anywhere near the quality of the original plates, I'd say I'm about 95% of the way to being...
455 views
0 comments


Jonathan Hilty
Nov 17, 20175 min read
More successes with the Autochrome
Regarding Starch: Now that I'm mentally organizing everything, I've gotten a lot done in the last two weeks! The starch I use now is...
705 views
0 comments


Jon Hilty
Oct 31, 201710 min read
Success and Failure: Moving forward with the Autochrome
I've been playing with the idea of making autochromes for about 4 years now. Making photographs 100% from scratch had always interested...
706 views
0 comments
Jon Hilty
Apr 19, 20174 min read
Some reflection on the Lippmann mirror
Don't worry, I've gotten the bad jokes out of my system with that title. Recently I had a bad case of diarrhea of the mouth, or at...
365 views
0 comments
Jonathan Hilty
Apr 19, 20153 min read
The Road to Color: The Lippmann Plate
Ever since I first became interested in photography, I've always wanted to do everything from scratch, from start to finish. Now with...
690 views
0 comments
bottom of page